After Harvest Consignment Auction
Located: Off Interstate 90 at Dexter, MN exit #193 then 1/4 mile east on Hwy 16 (130 State Hwy 16, Dexter, MN 55926)
THURSDAY, DEC. 12, 2019—9:30 AM
Consign your farm equipment including tractors, combines & heads, tillage items, wagons, construction items, skid loaders, semi tractors, trailers, pickups & cars.
Equipment taken in thru Saturday noon, Dec. 7th–no consignments taken in Dec. 8th thru and including sale day. –NO TIRES–Titled items must have a current certificate of title or registration when brought in to sell.
To consign items call: 507 584 0133 office.
Lunch by Gleason’s Concessions—Not responsible for accidents—Sales tax charged on all applicable items
ON LINE BIDDING AVAILABLE
===================================
===================================
Farm Sale #1
The following list of equipment is from the retirement auction of Moenning Farms. Ph: Paul-507 923 5717 or Mark-507 421 5952
TRACTORS
- 1978 JD 8430 tractor, 18.4×38 tires & duals, 3 pt, pto, 750 hrs. on complete overhauled, differential lock, 3 hyd, air cond., LED lights, 2nd owner, SN# 8430H005421R
- 1975 JD 4630 tractor, 20.8×38 tires & duals, 14.9×24 fronts, Hyd. Front assist, quad range, 3 hyd., air cond., SN# 4630H012969R
- 1971 JD 4620 tractor, cab, heat, AC, overhaul on motor, weights, front fuel, tank, syncro trans, 2 hyd, 3 pt, quick hitch, small 1000 pto, 18.4×42” tires & duals, 14L x 16.1, Sn#T813R0123036R
- 1972 JD 4020 tractor w/JD factory cab, 18.4×34 tires, 3 pt, pto, side console, syncro trans, 2 hyd., SN# T213R268742R
- 1985 Versatile 856 Destination 6 tractor, 12 speed trans, power shift, 3 pt, pto, 18.4×42” tires & duals, L-10 cummins, original rubber, 5833 hours, 2nd owner
COMBINES, CHOPPERS & HEADS
- 2001 JD 9650 walker combine, Contour Master, 2 oil cooler reservoir, 18.4×42 tires & duals, 16.9×26 rear tires, Green Star ready, long auger, chopper & spreader, hopper ext, wired for precision monitoring system, 3280 engine hours, 1978 separator hours, SN# H09650W690970
- 1980 JD 8820 combine, inside tires 18.4×42, outside 14.9x46R duals, 16.9×26 rear tires, large hopper ext, RWA, chopper, 17’ long auger
- 2008 Drago N8 chopping corn head, (w/corn sweeper reel, (sell separately) auto deck plates, header height control, SN#25478
- 1996 JD #893 corn head, knife rolls, hyd. Deck plates, single point hookup, 50 series drives, SN#H00893X666527
- JD 653A corn head, 6 row 30”, header height control
- 2003 JD 925 F bean head, full finger, Crary air reel, 3” cut, SN#H00925F701467
- 1997 JD #925 bean head, poly snouts, 3” cut, SN#H00925F672004
- 30’ head trailer
- JD pickup head, 4 belt w/poly teeth, #275786H
- JD 5400 chopper, 3200 hours, 2wd, 18.4×26 tires, 10.00×16 rears, Dura-drum, extra wear kit, extra truck chute with wind chute & auger box
- JD 3 row corn head for 5400 chopper
- JD #443 high tin corn head with chopper plate for JD 5000 chopper, 4 row 30”
- JD 5 ½’ hay head w/gauge wheels
GRAIN CART & WAGONS
- Brent 520 grain cart, scale, 28.1×26 tires, SN#52009124G
- Year Round 550 bu. wagon & gear, rear brakes & lights
- (2) Brent 500 Grain Train wagons, Model 5000F, 425/22.5 tires, rear brakes, SN# 6002 & SN#6003
- Bradford 250 bu. gravity wagon w/Parker gear
- (2) Parker 350 bu. gravity wagons w/JD 1075 gear
- (3) John Deere 214 chopper boxes, 1065A gear, 2’ conveyor extension
PLANTER & DRILL & PARTS
- John Deere 7000 16 row 30” planter, new gauge wheels & press wheel adjustments, precision corn units & Kinze bean units, insecticide, Red Ball fert, Yetter row cleaners, Precision 20/20 monitor w/wave vision seed tubes
- Yetter 4 box Seed Jet II, gas powered motor, seed box system
- (16) JD single disc openers off 7200 JD planter, w/fert. Attachments
- (16) JD single disc. openers, fits 7” x 7” beam with liquid fert. Attachments-cast iron 1770 style
- JD 10’ drill, 6” spacings, double disc, hyd. lift, w/grass seed
TILLAGE
- Krause 4927A rock flex 27’ disc, 3 bar harrow, SN#4462
- Deutz Allis #2500 rock flex disc, 27 ½’,
- Krause 6150 Landsman XT soil finisher, 270# front shank, double 180# K-tine style shank, w/bar harrow, 27’
- JD 550 Mulch Master 21’, 24” sweeps, w/star wheels, rear leveler
- John Deere 712 disc chisel, 9 shank
- Krause 4241 field cultivator, K tine shanks, 45’, 3 bar harrow, walking tandems, SN#1737
- JD 1000 field cult, 24 ½’, pull type, hyd. fold, 3 bar #960 JD harrow
- Krause 4610 F3 row crop cultivator, 16 row 30”, SN#3116, (2) set of wheels, stabilizers, extra spacings, K tine shanks, hyd. fold
- Krause 4612 F3 12 row 30” row crop cult., w/28% kit, hyd. fold, SN#1184
- Krause 4608 F3 8 row 30” row crop cult., hyd. fold, SN#2441
- JD 2800 6 bottom on land plow, auto reset, rolling coulters, variable width
- Melroe 60’ pull type drag cart, with Kovar coil tine units
- MC 12E Rotary scythe, small 1000 pto
SPRAYER
Hardi Navigator NAV 1000 sprayer, 361 diaphragm pump, boom section controls, triple nozzle bodies, foamer, 13.6 38 tires, 120” axle spacing, 60’ Delta boom, SN#3626
HAY EQUIPMENT
- Hesston 4600 in-line baler, twine, 14”x16” bale, chute & side drop chute, bale thrower, 540 pto, new finger
- New Holland 495 hay bine, 12’, SN#353689
- Ag Bagger G 6000, 8’ w/200 ft. cables, 540 pto, stagger rotor teeth, SN#G0009901805
GATOR
JD 825i gator, 4×4, cab, heat, power dump, brush guard, lights, SN#1M0825GS–TBM020504
MISC. ITEMS
- Mohawk batwing mower, 540 pto, 15’
- (44) Yetter vertical till coulters for chisel plow
- (20) JD single disc openers, fits 7” x 7” beam with liquid fert. attachments
(end listing sale #1)
======================================
======================================
TRACTORS
- 2008 New Holland T8050 tractor, mfd, 480/80/46″ tires & duals, 380/85/R34 tires & duals, 22 front weights, power shift trans., Pro 600 monitor (Auto Steer), with C/IH 372 receiver, 3454 hours, 4 remotes, 3 pt, pto, buddy seat, front fenders, quick hitch, reversing fan
- 2011 Case/IH Magnum 315 tractor, mfwd, 2069 hours, cab, power shift, 1000 pto, front wts, quick hitch, rear & front duals, guidance ready, FM-1000 display w/Glonass RTK, SN#ZBRD01928
- 2015 JD 6130r tractor, mfwd, 24 speed, auto quad, prem. light package, panorama roof, 3 scv’s, cold start package, 3500 hrs.
- 2007 C/IH 275 Magnum, mfd, 500 IH auto steer, 4300 hrs, 600 hrs. on new Michelon rear tires, front rubber 50%
- 2004 John Deere 8520 tractor, 7165 hrs, 16 speed power shift, lLS 4 hyd remotes, Big 1000 pto, Catagory 4 hitch, front & rear duals, auto steer ready, SN# RW8520P023903
- Farmall M tractor
FARM EQUIPMENT & SPRAYERS-CONSTRUCTION EQUIP
- 2013 Soil Pro 513 Wil Rich ripper (chisel plow), 18′, 9 shank, 24″ centers, 3 bar coil tine harrow, 28″ blades, hyd. hitch
- John Deere #2700 ripper, 7 shank w/rear leveler & basket
- IH #6000 disc chisel, 9 shank, new teeth
- DMI Ecolo Tiger #730 B disc ripper, 7 shank
- DMI Ecolo Tiger #730 disc ripper, 7 shank
- 2012 John Deere #2625 disc, 40’8″, 5 section frame, walking tandems on main frame & wings, gauge wheels, heavy duty transport tires, 3 bar coil tine harrow, 11″ spacings
- John Deere 630 disc, 3 bar tine harrow
- 2013 C/IH 200 field cult, 35′, rolling basket, tandems, stabilizer wheels
- John Deere #726 30′ mulch finisher with coil tine harrow
- Krause 11 shank chisel plow, pull type
- C/IH #4300 field cult.
- Schaben LA9000 16 row 28% bar
- Best Way 750g sprayer, 60′ boom, 4 section shut offs, foam marker, Raven monitor
- 200 gal. pull type sprayer
- Allis Chalmers #260 pull scraper, dolly wheel, 9′ cutting edge w/drop down center
- Woods 15′ bat wing mower, 1000 pto
TRUCKS-TRAILERS- PICKUPS-CARS-END DUMP-SANDER TRUCK
- 2000 Int. 4700 single axle w/20′ van body, tommy lift gate, 5 speed trans., 254″ wheel base, roll up door
- 1995 Mack 250, single axle, 6 cyl, 6 speed trans, w/10′ flat bed w/5th wheel
- 1986 Ford L9000 truck, 3406 Cat, 8 speed, 15′ box, side wing, tail gate sander, tandem axle
- 1997 Raglan 36′ frameless end dump, tandem axle, w/liftable tag, alum. draft arms, 2 way tail gate
- 2004 Great Dane 53′ refrigerator trailer, air ride, new suspension & brakes, new alternator
- 1984 Holden HLB 50′ lowboy trailer, quad axle, beaver tail w/ramps, 20,280 gvw
- 2001 Tow Master skid trailer, tandem axle, 17′ (15′ + 2′ tail), air brakes, pintle hitch, 5′ tip up ramps, 78″ inside width, pair 8 bolt heavy duty oil bath axles
- Constructors 20′ hyd. tilt deck trailer, tandem axle
- 16′ tandem axle trailer w/ramps
- 2003 Ford Ranger pickup, Super cab, 4 liter gas, 5 speed, 150,000 miles
- 1994 Mazda pickup, 4×4, air, manual trans., needs trans. work, 222,651 miles
- 2012 Chev. Equinox, 4wd, power locks & windows, Ecotec 4 cyl. motor, motor needs work
- 2 wheel trailer, no title
COMBINES & HEADS
- 2002 John Deere 9550 combine, 3367 hours, 2017 separator hours, 2wd, chopper, yield monitor, 18.4R 38 duals, spreader, 20′ unload tube, Greenstar yield & moisture, SN#H09550W695767
- Gleaner F combine, GM straight 6 cyl., grain tank ext, new clutch & separator clutch, 23.1×25″ tires
Gleaner 4 row 30″ corn head
- John Deere #643 corn head, 6 row w/Case adaptor plate
- Gleaner 16′ bean head, w/love bar, hyd. adjustable reel
- John Deere #220 flex head
- Gleaner grain pickup head
- JD bean reel off 635, (for parts)
PLANTER
- 2007 John Deere 1770 planter, 12r 30″, flex fold, vacuum, 1.6 bushel, 350 monitor, dry fertilizer w/single disk openers, adj. heavy duty down force springs, flex fold- SN#A01770F720116
- 1996 John Deere 1770 12 r-30″ planter, row cleaners, in-furrow, precision 20/20 monitor
- 1996 John Deere 1750 planter, 6 row 30″, 1.6 bu., finger pickup, no till coultes, SN#H01750R670554
- John Deere #1240 4 row planter
LIVESTOCK EQUIPMENT
- NH #3400S Dura Tank manure spreader, 2 1/2 years old
- Calument #2800 liquid manure tank, w/6″x16′ hose
================================
================================
CONSIGNED BY KENNETH DE WITT ESTATE
- 2015 C/IH 75C tractor, mfd, 3 pt, 2 remotes, rear wts, Deluxe cab, w/air & heat, approx. 1050 hours, SN# ZFAL04059, engine SN# 301258, w/C/IH WL-620 self leveling loader w/84″ bucket
- New-Edge High Reach Clipper Model 50504250, tilts to cut small trees, quick tach
================================
================================
Farm Sale #2
CONSIGNED BY VIRGIL BERGENE TRUST ESTATE
- John Deere 4020 diesel tractor, wide front, 6600 hours, 18.4×34 tires, 2 hyd, 3 pt, quick hitch, pto
- Int. 684 diesel tractor,16.9×28 tires, 1 hyd., 3 pt., 540 pto, 4481 hours, bought new, with Westendorf loader & bucket
- Int. 400 planter, 4 row, 30″, dry fert, w/openers, corn & bean drums
- Int.720 plow, 4 bottom, rolling coulters
- Int. #55 chisel plow, 11 shank, 3 pt.
- New Holland #850 round baler
- John Deere #1000 field cult., 3 pt, mounted, 3 bar harrow
- H & S tedder, 7′, pto drive
- Farm King 8′ snow blower, hyd. adjustable, 540 pto
- John Deere grain drill, 6″ spacings, double disc, hyd. lift
- 15′ pony drag
- New Holland #411, disc bine, needs bar work
- New Holland #315 square baler, bale counter, chute
- 3 pt. bale mover
- bale fork w/bucket mounts
- Woods 3 pt. mower
- 2 grain augers
- bale conveyor, 30′
- Woods 3 pt. 8′ blade
- (2) fuel barrels, horizontal 200 gal. w/stand
- 500 gal. fuel barrel w/pump
- 110 gal.transfer tank w/12 volt pump
- misc. tools
(end listing sale #2)
===================================
===================================
HAY EQUIPMENT
- 2014 John Deere 559 round baler, app. 12,000 bales, exc. cond., mega-wide, wrap, high moisture, v-core, 540, bale ramp
- 2015 John Deere 1330 square baler, non pre-cut, tandem axles, auto greaser, harvest tec preserve kit, led lights, app. 7300 bales
- Gehl #420 V rake, hyd. lift, 8 wheel
WAGONS-AUGERS
- 2005 Brent #1080 grain cart, 1000 bu., 20″ auger, scale, Brent tarp, hyd. spout, big single floater tires, corner unload auger
- M & W 400 bu. gravity wagon, 2 door, & gear
- 2003 Unverferth #630 gravity wagon, left hand unload, 625 bu.
- 2006 Unverferth #630 gravity wagon, left hand unload, 625 bu.
- Kilbros 350 wagon & gear
- Kory 8 ton gear, 12.5×15′
- New-hay rack-top only
- hay rack with sides on JD #953 gear
- Harvest Int. 13″ X 68′ auger, swing hopper, hyd. lift, 5 years old
SNOWBLOWERS
- Farm King 8′ snowblower, 540 pto, hyd. spout
MISC. ITEMS
- Engine overhaul kit-Allis Chalmer WD 1948-1953, bought from AGCO 15 years ago, always stored in dry storage, Part #79016776, has sleaves, pistons, rings, bearings, gasket set, does not have valves
- TMG Ind. bi-directional 86″ blade
- 500 gal. fuel barrel
- (10) 24′ 8/12 pitch truss set
- 35 KW generator, pto
- 25 KW generator, on cart, pto
- gray distributor screener
- 2-JD planter markers w/cylinders
- 6-cutter coulters
- 2-pallets misc. anhy. parts
====================================
====================================
CONSIGNED BY MOWER COUNTY
- 2007 Dodge Grand Caravan, 91,600 miles
- 2001 Ford F250 pickup, 4×4, 187,496 miles
- 2001 Flatbed trailer
- Miller GL 25 tractor loader, 8′ bucket w/tractor frame brackets, off 6430 JD, like new
- V-plow
- Wassau V-plow, model VX5896
- (2) Volkswagon motors (Flat 4 cyl)
- 3208 Cat V8 engine w/transmission & radiator
- Detroit V6 engine
- Detroit engine model 50337201, 3 cyl.
- 351 Windsor engine w/transmission
- engine stand
- 2009 Coats 1250 wheel balancer
- KHB 400 hydraulic hammer
- Miller Gold Star 400SS stick welder w/misc. welding wire & sticks
- pot plaster/sand blaster w/blasting sand
- 6.5′ fiberglass topper from 2008 Ford F150
- Rat Pack pickup bed tool box
- pallet of misc. bolts, lag bolts, etc
- exam table
end of county items
=============================
=============================
Sale #3
Seller is moving to an apartment and will sell all of his many shop and hand tools. Items are in real nice condition.
- North Star air compressor, 80 gal. tank, 5 hp, single phase, 15.9 CFM, @ 90 lbs.
- (2) 4 wheel heavy duty dolly carts
- (4) full bolt racks
- Welding table
- Elec. fence post & insulators
- (10) shelf shelving unit
- (3) buckets of bolts
- (3) rolls of rubber matting
- (6) buckets shop cleaning & lubricant supplies
- (7) qts. 30W motor oil
- (2) 5 gal. hand pump grease cans w/grease
- Sears portable air compressor, 3 ½ hp., 25 gal.
- (2) rolls 2” nylon strap
- Air reel w/hose
- (2) welding helmets
- Wheel barrel
- Misc. bucket nuts & bolts
- Rigid cordless drill
- (3) elec. hoists & hoist cable w/hook
- Torch cart, torch & accessories
- Miter saw
- Anvil-50#
- 14” railroad rail
- 7 ¼” Craftsman circular saw
- Bench grinder
- One four bolt trailer tire & rim
- (9) tubes NAPA wheel bearing grease
- (5) vise
- ¾ drive impact sockets 1”-1 ½”-full set
- Dremel tool
- Craftsman socket w/case
- Craftsman reciprocating saw
- Rigid angle grinder
- Roto zip spiral saw w/case
- Mini Dremel tool
- LP blow torch
- Set of semi triangles
- Tool box of pipe tools
- 3-saw horses
- 2-floor jacks
- 2-screw jacks
- 2-hyd. jacks
- 1-antique jack
- 1-battery charger, 60 amp w/250 start
- Box of saws
- 3-stands w/elec. outlets
- 1-box 3/8” drive sockets/ ratchets/ extensions
- 1-box socket misc.
- 1-box assorted wrenches
- 1-box regular wrenches
- 1-box hammers
- 1-box staplers & staples
- 1-box ¼” drive sockets
- 1-box screw drivers
- 1-box grinding wheels & brushes
- 1-face shield-clear
- Butane torch & supplies
- Flashlights
- Orbit sander
- Belt sander
- Reciprocating saw blades
- 4” bench grinder
- Black & Decker elec. screw driver
- Kobalt bit driver
- ¼” Craftsman drive set
- Leather punches
- 1-box of testers-anti-freeze, test lights, ohms meter
- ¼” drive set
- ½” -3/8” drive set
- Putty knives
- 2-snap pulleys
- Bag of misc. funnels
- Dolly cart
- 3/8”-1/2”-3/4” air impacts
- 1-air die grinder
- 2-boxes drill bits
- Lincoln battery grease gun
- 1-box pipe wrenches
- 1-box tin snips
- 1-box crescent wrenches
- 1-box fence wire cutters
- 1-box pliers & channel locks
- 1-box electrical pliers
- 1-box tape measurers
- 1-box files
- ½” sockets & ratchets
- Box punches & chisels
- 2-oil pans
- Box clamps
- Box ¼” bit drivers
- Box vise grips
- Box air chucks & misc.
- Craftsman cordless drill
- Cut off saw & stand
- 3-chain binders & chains
- 16’ & 30’ log chains
- Pressure washer
- Spare pressure washer pump
- Small shop vac
- roll chicken wire-new
- 2-air hoses
- 2-shop stools & wheels
- 2-com a longs
- Crate grease guns & oil cans
- 3-creepers
- Red tool box
- Lawn sprayer
- LP tank
- Jumper cables
- Tow strap
- Box 1” ratchet straps
- 3-rolls wire fence
- Misc. copper & brass
- 1-box hitch balls
- (3) pickup hitches
- Grinding disc.
- Remington 30 propane heater
- Gutster demo bar
- Misc. hand tools, shovels, rakes, forks, spades
- ½” elec. drill
- Extension cords & power strips
- Clevises & hitch pins
- (2) kerosene plastic jugs
- Misc. shop magnets
- Semi winch bar
- (2) axe, (1) hatchet
- Alum. Ramps
- Semi tow hooks & safety cables
- Small box misc. lubricants
(end sale #3)
====================================
====================================
LATE CONSIGNMENTS
- 2011 Ford F-250 pickup, 4×4, diesel, 6.7 power stroke, 4 door crew cab, brush guard, 273,134 miles
===============
NEW INVENTORY-ATTACHMENTS
- 60″ heavy duty skid steer brush mower
- 84″ skid steer rock & brush grapple
- 80″ skid steer rock & brush grapple
- 75″ skid steer rock & brush grapple
- 66″ skid steer rock & brush grapple
- 84″ skid steer rock bucket
- 80″ skid steer rock bucket
- 75″ skid steer rock bucket
- 66″ skid steer rock bucket
- 70″ skid steer root grapple
- 80″ skid steer root grapple
- (2) skid steer tree & post puller
- (2) sets of 6′ pallet fork extensions
- (2) sets of 7′ pallet fork extensions
- (3) open weld quick attach plates
- (3) closed weld quick attach plates
- (2) receiver hitch skid steer trailer mover
===============
- Gehl 65MX grinder/mixer, magnet
- 2007 Buick Lucerne car, auto, air, V6, 215,000 miles
- Loftness 8′ snow blower, hyd. spout
- 2008 Houle 7300 gal. 3 axle spreader w/6hose bar
- Krone flow meter & harness, one year old, new VTI manifold
- 2011 Kia Soranto SUV, 2wd, 4 cyl, 110878 miles
- Allis Calmers #200 tractor, wf, 3 pt, dual pto, dual hyd, power steering, wheel wts, front wts, cab & heat,
- Balzer 20′ 3 pt. stalk chopper
- 16′ hyd. hog trailer
- JD 4620 tractor, 9500 hours, syncro, Year Round Cab, 18.4 38 rubber, 20.8 38 Peterson band duals
- New Holland #479 haybine
- M & W 20′ rotary hoe
- John Deere #7000 6 row 30″ planter, liquid fert.
- Houle knife bar-6 manifold disc bar
- 1979 Brenner 5000 gal. stainless fert. tank, 13 hp. Honda gas motor, John Blu pump, air ride, new suspension & new brakes & drums
- Hesston BP 25 bale processor
- 1997 Chev. pickup, 4×4, 5 speed,
- 1996 Chev. Suburban, 4×4, 5.7 motor, automatic, air, 144,988 miles, one owner
- Universal hyd. loader, 7′ bucket,
- 2006 Ford F-250 pickup, 2wd, gas, automatic, 133,000 miles
- Bully Dog snow plow kit, 7 1/2′, fits 2000 and newer Chev. pu
- Nitro Master #8000 52 1/2′ anhy. bar,
- smaller gravity wagon on Gehl gear
- Farm Fans AB=12B grain dryer, single phase, cont. flow
- Peck Truck/hopper auger, hyd. drive
- 1974 Chevy C65 grain truck, Chevy 366 gas with 5/4 trans, tandem axle, air brakes, w/18′ bo& hoist
- 1973 Chevy. C80 grain truck, Chev. 366 gas, with 5/4 trans, tandem axle, air brakes, 18′ box & hoist
- Maverick by Mossburg 12 gauge Model 88, Vented 28″ bird barrel, never been fired
- Brent #1084 Avalanche grain cart on tracks, w/scale
===============
===============
CONSIGNED BY SECURED CREDITOR
- John Deere 7210 tractor, mfwd, 3 pt, 540 pto, power quad trans, w/left hand reverse, 3 hyd.,11370 hours.
- Case/IH #4200 soil finisher, 25′, hyd. front disc gang, 3 bar harrow
- John Deere 750 no-till drill, 15′, 7 1/2″ spacings, markers, 2 point hitch
- Bourgault 2155 air cart, fill auger, wheel drive pump, 2 compartments
- Glencoe #7400 disc chisel, 11 shank, hyd. adjust front gang, (right walking tandem needs work)
- Buffalo #6300 row crop cultivator, 6 row w/liquid kit
- John Deere BWF 18′ disc, manual fold
- IH #720 5 bottom plow w/coulters
- Dakon RR100 flipper rock picker
- Rhino SM60 skid loader rotary cutter, 60″ cut, 3 pt. mtd., hyd. driven
- 5 section drag & cart
- Fast #1000 60′ spray boom, hyd. fold, rear hitch, dolly wheels
- NH #185 manure spreader, tandem axle, poly floor
- Schuler 125S feed cart. 540 pto, 4 speed
- Farm Fans AB 180A grain dryer, single phase, 4905 hours, continuous flow
- Alloway 8″ x 32′ auger, 10 hp. single phase elec. motor
- Mayrath 8″ x 51′ auger, 10 hp. single phase motor
- Westgo 8″ x 56′ auger, w/10 hp. single phase motor
- Hutchinson 8″ x 60′ auger, pto drive
- J & M 250 bu. gravity wagon w/JD gear
- Killbros 375 bu. gravity wagon w/Dakon gear
- Killbros 375 bu. gravity wagon w/Allis gear
- JD #445 lawn mower
===============
===============
FOR INFORMATION CONTACT Hamilton Auction Co. at 507 584 0133 office
TERMS: Cash or good check. Nothing to be removed until settled for. All announcements the day of the sale take precedence over any advertised material.
web site: www.hamiltonauctioncompany.com ON LINE BIDDING AVAILABLE
Sale conducted by: HAMILTON AUCTION COMPANY, 130 State Hwy 16, Dexter, MN 55926 Phn. 507 584 0133 office
Auctioneers: Andrew Hamilton #50-128; Bill Hilton #50-24; Dean Eastman #50-57; Lyle Eastman #50-130
Clerk: Hamilton Auction Co. Dexter, MN 55926 Phn. 507 584 0133